|
| |
|
PROGRAM |
|
THE FINAL PROGRAM
ARTCAST 2010 |
|
|
|
Thursday: May 13, 2010
|
|
Location |
Faculty of Metallurgy and
Materials Science
111 Domneasca Street,
Building M, Room M 007 |
|
16:00 - 22:00 |
Reception and
accommodation of guests
Contact: Vasiliu Adrian -
0721324575
Tudor Beatrice
- 0751257091
|
|
Friday: May 14, 2010
|
|
Location |
VISUAL ART MUSEUM GALATI
Ioan Simion Marculescu
Room
141 Domneasca Street |
|
09:00 - 10:00 |
Reception of
guests
|
|
10:00 - 10:30 |
Opening Ceremony
|
|
|
Welcome Speech:
Prof. Nicolae CANANAU, PhD
Dean of the Faculty of
Metallurgy and Materials Science,
Dunărea de Jos University of
Galați. |
|
Special guests speeches |
|
10:30 - 11:00 |
Coffee break |
|
11:00 - 12:30 |
Presentation of
works:
|
|
|
- Iulian RIPOSAN - New
Developments in High Quality Grey Cast Irons - a Review |
|
|
- Nicolae Cănănău -
Study on the Material Flow at the ECAE Process |
|
|
- Ana Doniga -
Artifacts in the Getae-Dacian treasures |
|
12:30 - 14:00 |
Lunch |
|
Location |
Al. I. Cuza Student
Campus,
Meeting at the Canteen 2 |
|
14:30 - 18:00 |
Presentation of
works, on sections
|
|
Location |
Faculty of Metallurgy and
Materials Science
111 Domneasca Street,
Building M |
|
|
SECTION I ART CASTING
Room M 212 |
|
|
Office section:
- Denyo ALIPIEV
- Ana DONIGA
- Gheorghe FLOREA |
|
|
|
1. |
I.
SANDU, O. MIRCEA, I. SARGHIE, A.V. SANDU, C.
MARIAN, V. VASILACHE - APPLICATIONS OF
NON-INVASIVE TECHNIQUES IN THE ANALYSIS OF
CORROSION CRUSTS FORMED ON ARCHAEOLOGICAL METAL
OBJECTS |
|
2. |
Anisoara CIOCAN, Florentina POTECASU - SCRAP
QUALITY AND METALLURGICAL EFFECTS ASSOCIATED
WITH COPPER AND TIN AS TRAMP ELEMENTS IN THE
CASTING STEELS |
|
3. |
Olivier DUHAMEL, Denyo ALIPIEV - ART CASTING:
FOUNDRIES IN INTERNET AND SOME APPLICATIONS |
|
4. |
Tamara Radu, Florentina Potecasu _ DECORATIVE
SURFACES OBTAINED THROUGH THERMAL ZiNCKING
|
|
5. |
Gheorghe FLOREA, Daniela BURUIANA (NEGOITA),
Alexandru CHIRIAC, Adrian VASILIU - THE
EXPLOITATION OF THE COPPER SHEET WASTAGE IN
APPLIED ART |
|
6. |
Ana
Doniga - Artifacts in the Getae-Dacian treasures |
|
7. |
Stefan DRAGOMIR, Alexandru CHIRIAC - ALLOYS USED
AT DECORATIVE PARTS INSIDE THE AIRPLANES |
|
8. |
Gheorghe Croitoru, Ion Rusu - HISTORY OF FABERGE
EGGS |
|
9. |
Julieta Daniela SABĂU (CHELARU), Vasile Filip
SOPORAN, Ovidiu NEMEȘ - TIME ANALYSIS OF KING
MATTHIAS THE IST SCULPTURAL GROUP |
|
10. |
Florin Chichernea, Alexandru Chichernea - VALUE
ANALYSIS BETWEEN ART AND TECHNIQUE - Part I |
|
11. |
Florin Chichernea, Alexandru Chichernea - VALUE
ANALYSIS BETWEEN ART AND TECHNIQUE Part II |
|
12. |
Aurelia STANESCU, Alexandru STANESCU, Bogdan
FLOREA - Making art replica models using 3D scan
and electrodepositing |
|
13. |
Petrica Hagioglu, Constantin Gheorghies -
MATERIALS USED FOR MANUFACTURING SOME OBJECTS
FROM 1600 BEFORE CHRIST 500 AFTER CHRIST
PERIOD |
|
14. |
Beatrice TUDOR, Marian BORDEI - art WORKS
CASTING USING WAX patterns |
|
15. |
Viorel ENE, Tibor BEDŐ, Marius BENȚA - THE MAIN
DATA ABOUT THE BIG BELL OF THE BLACK CHURCH IN
BRASOV |
|
16. |
Viorel ENE, Tibor BEDŐ, Marius BENȚA - 27 MARCH
2009 150 YEARS FROM THE BLESSING OF THE BIG
BELL OF BLACK CHURCH IN BRASOV |
|
17. |
Elena
PARASCHIV, Victor PĂUNESCU, Cristina RĂDUCAN -
SCULPTURE, EXTENDED NATURE |
|
18. |
Daniela BURUIANA (NEGOITA), Gheorghe FLOREA,
Alexandru CHIRIAC - THE PROCESS INVOLVED IN
MAKING THE MEDALS |
|
19. |
Stefan DRAGOMIR, Gheorghe FLOREA - USE OF
UNCONVENTIONAL MATERIALS TO OBTAIN PIECES OF
URBAN ART |
|
20. |
Tibor
BEDŐ, Viorel ENE, Ioan CIOBANU - SANITARY
SILICONE USED TO MAKE SMALL ART CAST PARTS |
|
21. |
Adrian VASILIU, Daniela BURUIANA (NEGOITA) - DO
BIRDS REPRESENT A MENACE TO OUTDOOR MONUMENTS? |
|
22. |
Ana
Doniga, Miltiade ISTRATE - ARTIFACTS PROTECTION
COATINGS |
|
23. |
I.
SANDU, C. BEJINARIU, A.V. SANDU, V. VASILACHE,
I.G. SANDU, M. BRÂNZILĂ - OBTAINING AND
CHARACTERIZATION OF VITROCERAM BY CHEMICAL DOPED
ZnO FOR ART MOSAIC |
|
24. |
Beatrice TUDOR, Daniela BURUIANA - VACUUM
CASTING OF OBJECTS MADE OF PRECIOUS MATERIALS |
|
25. |
G.
Florea, C. Oancea, C. Gheorghies - New
Achievements in Manufacturing of CHurch bells |
|
26. |
Bogdan Florea, Cezar Balescu, Vasile Mirea,
Augustin Semenescu STUDIES REGARDING THE
ACHIEVEMENT OF LIGHT FUSE MODELS FOR CASTING THE
ART OBJECTS |
|
27. |
Ana
Doniga - WEAPONS AS WORK OF ART |
|
|
|
SECTION II PROCESSES,
TECHNOLOGIES AND EQUIPMENT IN METALLURGY
Room M 201 |
|
|
Office section:
- Iulian RIPOSAN
- Ion CIOBANU
- Nicolae CANANAU |
|
|
|
1. |
Yavor
Lukarski, Jordan Georgiev, Lubomir Anestiev,
Rositsa GAVRILOVA, Simona BEJAN - Investgation
OF TITANIUM HYDRIDE Produced FROM TITANIUM WASTE
|
|
2. |
Simona BOICIUC, Elena Drugescu - RESEARCH ON
ABRASIVE WEAR BEHAVIOR OF LASER CLADDING LAYERS
WITH HIGH - SPEED STEEL POWDER TYPE HS6 -5-2-M2
|
|
3. |
Nicolae Cănănău, Gheorghe Gurău, Carmela Gurău -
STUDY ON THE MATERIAL FLOW AT THE ECAE PROCESS |
|
4. |
Tamara RADU, Lucica Balint, Maria Vlad -
Research on the complex microalloyed zinc melts
|
|
5. |
Alexandru CHIRIAC, Maria VLAD, Stefan DRAGOMIR,
Gheorghe FLOREA -
CONTRIBUTIONS TO THE STUDY OF SOME SPECIAL
MATERIALS FROM THE Al-Mn-Fe SYSTEM
|
|
6. |
Anna
PETROVA, Silvia SIMEONOVA, Radoslav VALOV,
Vladimir Petkov - PHYSICO-MECHANICAL AND PHYSICO-CHEMICAL
PROPERTIES OF BIO-INERT COMPOSITE CERAMICS |
|
7. |
Tibor
BEDŐ, Viorel ENE, Ioan CIOBANU - SOME
CONSIDERATIONS ON ENVIRONMENTAL SAND CORES WITH
INORGANIC BINDER |
|
8. |
Ioan
MILOSAN - THE KINETICS AND THERMODYNAMIC
TRANSFORMATION OF A SPECIAL S.G. CAST IRON
|
|
9. |
Ioan
MILOSAN - SOME KEY ELEMENTS FOR IMPROVING THE
TOTAL QUALITY MANAGEMENT CONCEPT |
|
10. |
Aurel
CRIȘAN, Diana ȚUȚUIANU, Tibor BEDŐ, Ioan CIOBANU
- INFLUENCE OF INCLINATIONS APPLIED TO RIBS ON
THE SOLIDIFICATION OF CAST PARTS |
|
11. |
Aurel
CRIȘAN, Diana ȚUȚUIANU, Tibor BEDŐ, Ioan CIOBANU
- INFLUENCE OF CORNER RADII APPLIED TO THE
JOINING AREA OF THE RIB TO THE PART WALL ON THE
SOLIDIFICATION OF CAST PARTS |
|
12. |
Olga
Mitoseriu, Florentina Potecașu, Stela
Constantinescu, Lucica Orac - COMPOSITE COATING
in COPPER matrix with Molybdenum IN DISPERSION
PHASE obtainED by Electrochemical methods
|
|
13. |
N.
CăNăNăU, D. SCARLAT, G. FLOREA - PROBLEMS AND
SOLUTIONS REGARDING THE CENTRIFUGAL CASTING OF
WIRE SHEAVE FOR HEAVY CRANES |
|
14. |
Carmen-Penelopi Papadatu - THE ECOLOGICAL IMPACT
OF METALLURGICAL INDUSTRY |
|
15. |
Jordan Georgiev, Stefan Stefanov, Dimitar
Teodosiev, Lubomir Anestiev - A SETUP FOR
PREPARATION OF GLASS-CARBON COATINGS ON
TiO2-Nb2O5 INTENDED FOR HIP JOINT PROSTHESES |
|
16. |
Raul
NOVAC, Olga MITOSERIU - THE INFLUENCE OF THE
HEAT TREARMENT UPON THE RESISTANCE TO CORROSION
OF THE COMPOSITE OBTAINED USING THE
ELECTRODEPOSITING OF TIO2 IN A NICKEL MATRIX
|
|
17. |
Ovidiu DIMA - PERMANENT FORMS FOR CASTING MORE
SUSTAINABLE, CLADDING HARD ALLOYS |
|
18. |
Roxana ȘTEFĂNICĂ, Carmen NEJNERU, Vasile MANOLE,
Ramona CIMPOEȘU HANU - ELECTRO-CORROSION
BEHAVIOR OF 7075 ALUMINUM ALLOY AFTER AGEING
TREATMENT |
|
19. |
Vasile BAșLIU - Researches regarding the
obtaining of some composite materials with
metallic matrix obtained through casting
|
|
20. |
Bojana TABAKOVA, Ivanka KALIMANOVA, Ina YANKOVA,
Hristiana NIKOLOVA - MATERIALS FOR TOTAL HIP
JOINT PROSTHESES: BIAXIAL FLEXURAL STRENGTH OF
TWO CERAMIC SYSTEMS |
|
21. |
Ion
HOPULELE, Carmen NEJNERU, Manuela Cristina PERJU,
Mihai AXINTE - THIN LAYERS OBTAINING BY ELECTRIC
SPARK IN LIQUID MEDIUM |
|
22. |
V.G.
Grechanyuc, N.I. Grechanyuc, Lucica Orac -
CORROSION RESISTANCE IN NEUTRAL SALINE FOG OF
THE COMPOSITES Cu-Mo OBTAINED BY PVD METHOD. |
|
23. |
Maria
VLAD, Gelu Movileanu - SOIL POLLUTION WITH HEAVY
METALS
|
|
24. |
Alexandru STANCIOIU, Olga Mitoseriu, Marian
BORDEI - Consideration regarding the heat
TREATMENT of sheets and strips from aluminum
alloy 5052 type |
|
25. |
Ioan
MARGINEAN, Bogdan-Alexandru VERDEș, Sorin-Adrian
COCOLAș - THEORETICAL STUDY REGARDING THE FLOW
CONDITIONS FOR ALLOYS THROUGH THIN CHANNELS
|
|
26. |
Nicolae Cănănău, Alexandru Chiriac, Vasile Bratu
QUALITY ASSURANCE OF CYLYNDRICAL CASTED PARTS
WITH SMALL THICKNESS |
|
27. |
Tamara Radu, Lucica Balint, Viorel Drăgan
Research on the effect of temperature and
duration of immersion on the layer thickness of
zinc coating obtained in microalloyed zinc melts |
|
28. |
Stela
Constantinescu CHARACTERISATION OF NIOBIUM
CARBIDE CHEMICAL DEPOSITION FROM VAPOUR AT
NORMAL PRESSURE |
|
29. |
Dimitar Teodosiev, Lubomir Anestiev, Jordan
Georgiev, Nartzislav Petrov, Petar Tzvetkov,
Cristiana Nikolova GLASS- CARBON BIOACTIVE
COATINGS ON A TiO2- Nb2O5 SUBSTRATE |
|
30. |
Alexandru Chiriac, Gheorghe Florea, Ioan Saracin,
Olimpia Panda SOURCES OF EMISSIONS IN THE
SINTERING AND BLAST FURNACE PLANT |
|
31. |
Ioan
CIOBANU, Diana ȚUȚUIANU, Tibor BEDŐ, Aurel
CRIȘAN - INFLUENCE OF RIB LENGHT ON THE
SOLIDIFICATION OF CAST PARTS |
|
32. |
Ioan
CIOBANU, Diana ȚUȚUIANU, Tibor BEDŐ, Aurel
CRIȘAN - INFLUENCE OF RIB THICKNESS ON THE
SOLIDIFICATION OF CAST PARTS |
|
33. |
Violeta VASILACHE, Sonia GUTT, Ion SANDU,
Gheorghe GUTT,Traian VASILACHE Development of
a new installation of elaboration-casting in
order to obtain composite materials with
metallic matrix |
|
34. |
Vasile BAșLIU STRUCTURAL ASPECTS OF
ANTIFRICTION PROPERTIES BRASS |
|
35. |
Alexandru CHIRIAC, Gheorghe Florea, Marian
NEACșU, Ioan Sărăcin, Olimpia Panda - STRUCTURAL
ASPECTS OF ANTIFRICTION PROPERTIES BRASS
|
|
36. |
Carmen-Penelopi Papadatu - THE BEHAVIOR OF SOME
NON-CONVENTIONAL TREATED STEELS DURING WEAR
PROCESS (III) |
|
|
19:30 |
Festive Dinner |
|
|
Al. I. Cuza Student
Campus,
Meeting at the Canteen 2 |
|
Saturday, May 15, 2010
|
|
Location |
Faculty of Metallurgy and
Materials Science
111 Domneasca Street,
Building M,
Room M 201, Room M 212 |
|
09:00
- 10:30 |
Presentation of
works, on sections (continued)
Conclusions,
Closure of the works
|
|
Location |
Danube promenade
(departure from the front
of the hotel VEGA).
107, Marii Unirii Avenue |
|
11:00 - 14:00 |
Short trip by ship on the
Danube |
CONFERENCE AREA
|
|
PRESENTATION INSTRUCTION |
Any accepted paper should be presented by one of the authors, otherwise it cannot be referenced as published at
ARTCAST 2010 Conference.
The working language of the Conference is English and this will be used for all presentations and discussions.
Time Allocation
All oral presentations are scheduled for 20 minutes. This period includes your presentation, time for questions, and time to change speakers. Plan to speak for 15 minutes, allow 4 minutes for questions and 1 minutes to switch speakers.
In order to keep the conference on schedule and to accommodate delegates who want to move between sessions, session chairs will be instructed to strictly enforce the time schedule.
Equipment
Each room will be equiped with a video projector and a PC computer. If it is necessary, you may use your personal laptop but you must notify the technical personel before the begining of the session. Conference computers have installed the Microsoft Office PowerPoint (Version 2003) and Adobe Acrobat (Version 9) software, and therefore presentations in these formats or earlier will be accommodated. Use only normal PowerPoint file (.ppt).
Authors are asked to bring their slide presentation stored on a USB memory Stick or on a CD ROM. We will use only PCs and Mac users should check if their presentations are correctly converted.
General Instructions
Ten minutes before your session commences, you should meet with the Session Chair and the other speakers in your session room. We recommended to upload your slides ten minutes before the start of the session. The technical personel will be in the lecture room to assist you. It is the responsibility of the presenting author to load the presentation onto the conference computer and ensure the presentation operates properly.
|
|
|
      
|
